Powersoft has extended two of its most popular fixed install ranges with the introduction of the two-channel Duecanali 6404 DSP+D and the four-channel Quattrocanali 8804 DSP+D<\/strong><\/p>\n Both products feature Dante<\/strong> digital audio networking architecture and on-board and high-end signal processing, making them ideal for applications where high SPL is required, such as clubs, performance venues and stadiums. <\/p>\n The Duecanali range<\/strong><\/a> is able to drive low impedance loads (2\/4\/8 Ohm<\/strong>) and 70\/100V<\/strong> distributed lines selectable per channel delivering a maximum output power per channel of: 1800 W at 8 \u2126; 3200 W at 4 \u2126; 4600 W at 2 \u2126; 9200 W at 4 \u2126 bridged; 6400 W at 8 \u2126 bridged; 4000 W at 100 Volt and 3200 W 70 Volt.
\nBoth equipped with Powersoft<\/strong><\/a>\u2019s trademarked switch-mode power supply with Power Factor Correction (PFC)<\/strong>, Smart Rail Management (SRM)<\/strong> and bridgeable switch mode fixed frequency Class D<\/strong> output circuit topology, the new Duecanali 6404 DSP+D<\/strong><\/a> and Quattrocanali 8804 DSP+D<\/strong><\/a> models now sits coherently alongside Powersoft<\/strong><\/a>\u2019s install dedicated amplifier platforms, addressing the requirement for small and large size applications where the channel count is limited and the need for a flexible product to work with Hi-Z<\/strong> and Lo-Z<\/strong> systems is a must.
\nDuecanali 6404 DSP+D<\/strong><\/a> offers excellent sound quality and ample output power, making it well-suited to serving as the main system in any venue where performance is priority. A fully integrated DSP yields extensive system management functionality. In addition to sound shaping and limiter functions, the DSP hardware and Armon\u00edaPlus<\/strong><\/a> software enable compliance with the crucial requirements of sound systems for emergency purposes.<\/p>\n
\nThe series is also versatile, providing status feedback via its front panel LED display or a connected PC running Armon\u00edaPlus<\/strong> software.
\nQuattrocanali 8804 DSP+D<\/strong><\/a> in just 1 RU offers smaller dimensions, lighter weight and high sound quality and reliability of all Powersoft<\/strong><\/a> products. Quattrocanali Series<\/strong><\/a> amplifiers implement a high-efficiency, microprocessor-controlled power supply with built in PFC (Power Factor Correction)<\/strong> that allows flawless worldwide operation with any AC mains voltage in the range 85-275 VAC<\/strong> tolerant to peak up to 400 V. The patented SRM (Smart Rails Management)<\/strong> technology allows to maximise the efficiency of the system and drastically reduce power consumption at any load and usage condition.
\nBoth of the products can seamlessly integrate within a networking environment through standard Cat5-cabled<\/strong> and Wi-Fi<\/strong> networks. Remote access via the Armon\u00edaPlus<\/strong><\/a> allows for full operability, including monitoring and diagnostics, via laptop, PC, tablet or smartphone. The fully-customisable interface seamlessly integrates all devices in one easy-to-manage screen, so that everything displayed can be monitored at a glance.<\/p>\n